Document Type : Original Article

Authors

1 Dept. of Operative Dentistry, School of Dentistry, Shahed University, Tehran, Iran.

2 Dept. of Polymer Science, Iran Polymer and Petrochemical Institute, Tehran, Iran.

3 General Dentist, Private Practice, Tehran, Iran.

4 Dept. of Operative Dentistry, Biomaterials Research Center, School of Dentistry, Shiraz University of Medical Sciences, Shiraz, Iran.

5 General Dentist and Dental Specialties Candidate, Dept. of Operative Dentistry, School of Dentistry, Shiraz University of Medical Sciences, Shiraz, Iran.

Abstract

Statement of the Problem: The clinical success of glass ionomer restorations depends on the strength of resin-modified glass ionomer (RMGI) cement bonding to dentin and there is limited information available regarding the bond strength of resin modified glass ionomers containing silica nanoparticles to dental structures.Purpose: The aim of this study was to compare the microshear bond strength (µSBS) of RMGI with and without silica (SiO2) nanoparticles to dentin of permanent teeth.Materials and Method: in this experimental study, the occlusal surfaces of 30 freshly extracted intact third molars were ground to expose the flat dentin and after conditioning with 20% poly acrylic acid, were randomly assigned to two main groups (n=15). The first group was filled with RMGI (Fuji II LC, GC) and the second group was filled with RMGI plus 0.5%wt. silica nanoparticles. Then, each main group was divided into three subgroups, and then stored in an incubator at 37 oC with 100% humidity for 1, 7, and 30 days. The µSBS test was performed using a universal testing machine (1 mm/min). The data were analyzed by t-test, repeated measures ANOVA and Tukey test (p < 0.05).Results: There were no statistically significant differences between the mean µSBS of the groups with and without nanoparticles along the different storage periods (p> 0.05). There was significant difference in µSBS values among the three different storage periods in all the tested materials (p < 0.05).Conclusion: Incorporation of 0.5 %wt. silica nanoparticles did not compromise the µSBS of Fuji II LC RMGI to dentin.Key Words   Glass Ionomer; Silica; Nanoparticles ; Shear Strength

Keywords

1. Adams LK, Lyon DY, McIntosh A, Alvarez PJ. Comparative toxicity of nano-scale TiO2, SiO2 and ZnO water suspensions. Water Sci Technol. 2006; 54: 327–334. [PubMed[Google Scholar]
2. Nicholson JW, Anstice HM, McLean JW. A preliminary report on the effect of storage in water on the properties of commercial light-cured glass-ionomer cements. Br Dent J. 1992; 173: 98–101. [PubMed[Google Scholar]
3. Coutinho E, Cardoso MV, De Munck J, Neves AA, Van Landuyt KL, Poitevin A, et al. Bonding effectiveness and interfacial characterization of a nano-filled resin-modified glass-ionomer. Dent Mater. 2009; 25: 1347–1357. [PubMed[Google Scholar]
4. Momoi Y, Hirosaki K, Kohno A, McCabe JF. Flexural properties of resin-modified "hybrid" glass-ionomers in comparison with conventional acid-base glass-ionomers. Dent Mater J. 1995; 14: 109–119. [PubMed[Google Scholar]
5. Somani R, Jaidka S, Singh DJ, Sibal GK. Comparative Evaluation of Shear Bond Strength of Various Glass Ionomer Cements to Dentin of Primary Teeth: An in vitro Study. Int J Clin Pediatr Dent. 2016; 9: 192–196. [PMC free article] [PubMed[Google Scholar]
6. Calvo AF, Kicuti A, Tedesco TK, Braga MM, Raggio DP. Evaluation of the relationship between the cost and properties of glass ionomer cements indicated for atraumatic restorative treatment. Braz Oral Res. 2016;30:S1806–83242016000100201. [PubMed[Google Scholar]
7. Gan X, Liu T, Zhong J, Liu X, Li G. Effect of silver nanoparticles on the electron transfer reactivity and the catalytic activity of myoglobin. Chembiochem. 2004; 5: 1686–1691. [PubMed[Google Scholar]
8. Kuhn AT, Wilson AD. The dissolution mechanisms of silicate and glass-ionomer dental cements. Biomaterials. 1985; 6: 378–382. [PubMed[Google Scholar]
9. Sadeghi Aqbash M, Rahimnejad M. Effect of Zinc Phosphate Nanoparticles in Combination with Glass Ionomer Cements on Streptococcus mutans. Journal of Mazandaran University of Medical Sciences. 2017; 27: 39–48. [Google Scholar]
10. Vanajassun P, Nivedhitha MS, Nishad NT, Soman D. Effects of Zinc Oxide Nanoparticles in Combination with Conventional Glass Ionomer Cement: In vitro Study. Advance Human Biology. 2014; 4:31–36. [Google Scholar]
11. Besinis A, De Peralta T, Handy RD. The antibacterial effects of silver, titanium dioxide and silica dioxide nanoparticles compared to the dental disinfectant chlorhexidine on Streptococcus mutans using a suite of bioassays. Nanotoxicology. 2014; 8: 1–16. [PMC free article] [PubMed[Google Scholar]
12. Esmi F, MS Saffari, A Taheri. The Effect of light curing glass ionomer containing various amounts of silica nanoparticles on the Streptococcus mutans activity. Daneshvar Medicine Journal of Shahed University. 2014; 108: 1–10. [Google Scholar]
13. Aydin Sevinç B, Hanley L. Antibacterial activity of dental composites containing zinc oxide nanoparticles. J Biomed Mater Res B Appl Biomater. 2010; 94: 22–31. [PMC free article] [PubMed[Google Scholar]
14. Garcia-Contreras R, Scougall-Vilchis RJ, Contreras-Bulnes R, Sakagami H, Morales-Luckie RA, Nakajima H. Mechanical, antibacterial and bond strength properties of nano-titanium-enriched glass ionomer cement. J Appl Oral Sci. 2015; 23: 321–328. [PMC free article] [PubMed[Google Scholar]
15. Mohammadi Basir M, Ataei M, Rezvani MB, Golkar P. Effect of incorporation of various amounts of nano-sized Hydroxyapatite on the mechanical properties of a resin modified glass ionomer. Shahid Beheshti University Dental Journal. 2013; 30: 216–223. [Google Scholar]
16. Korkmaz Y, Gurgan S, Firat E, Nathanson D. Shear bond strength of three different nano-restorative materials to dentin. Oper Dent. 2010; 35: 50–57. [PubMed[Google Scholar]
17. Xu HH, Quinn JB, Giuseppetti AA. Wear and mechanical properties of nano-silica-fused whisker composites. J Dent Res. 2004; 83: 930–935. [PubMed[Google Scholar]
18. Karabela MM, Sideridou ID. Synthesis and study of properties of dental resin composites with different nanosilica particles size. Dent Mater. 2011; 27: 825–835. [PubMed[Google Scholar]
19. Esmi RM, Daryakenari Gh, Atayi M, Mohammadi Basir M. Evaluating the effect of various quantities of silica nanoparticle addition on the mechanical properties of a light cure-resin modified glass ionomer. Advances in Environmental Biology. 2015; 9: 509–513. [Google Scholar]
20. Harnirattisai C, Roengrungreang P, Rangsisiripaiboon U, Senawongse P. Shear and micro-shear bond strengths of four self-etching adhesives measured immediately and 24 hours after application. Dent Mater J. 2012; 31: 779–787. [PubMed[Google Scholar]
21. Bonifácio CC, Shimaoka AM, de Andrade AP, Raggio DP, van Amerongen WE, de Carvalho RC. Micro-mechanical bond strength tests for the assessment of the adhesion of GIC to dentine. Acta Odontol Scand. 2012; 70: 555–563. [PubMed[Google Scholar]
22. Al-Hana DA, El-Messairy A, Shohayb F, Alhadainy H. Micro-shear bond strength of different composites and glass-ionomers used to reinforce root dentin. Tanta Dental Journal. 2013; 10: 58–66. [Google Scholar]
23. Moshaverinia A, Chee WW, Brantley WA, Schricker SR. Surface properties and bond strength measurements of N-vinylcaprolactam (NVC)-containing glass-ionomer cements. J Prosthet Dent. 2011; 105: 185–193. [PubMed[Google Scholar]
24. Shebl E, Etman W, Genaid TM, Shalaby M. Durability of bond strength of glass-ionomers to enamel. Tanta Dental Journal. 2015; 12: 16–27. [Google Scholar]
25. Tjandrawinata R, Irie M, Suzuki K. Marginal gap formation and fluoride release of resin-modified glass-ionomer cement: effect of silanized spherical silica filler addition. Dent Mater J. 2004; 23: 305–313. [PubMed[Google Scholar]
26. Braga RR, Meira JB, Boaro LC, Xavier TA. Adhesion to tooth structure: a critical review of "macro" test methods. Dent Mater. 2010; 26: e38–e49. [PubMed[Google Scholar]
27. Andrade AM, Garcia E, Moura SK, Reis A, Loguercio A, Silva LM, et al. Do the microshear test variables affect the bond strength values? Int J Dent. 2012; 2012: 618960. [PMC free article] [PubMed[Google Scholar]
28. Armstrong S, Geraldeli S, Maia R, Raposo LH, Soares CJ, Yamagawa J. Adhesion to tooth structure: a critical review of "micro" bond strength test methods. Dent Mater. 2010; 26: e50–e62. [PubMed[Google Scholar]
29. Sirisha K, Rambabu T, Ravishankar Y, Ravikumar P. Validity of bond strength tests: A critical review-Part II. J Conserv Dent. 2014; 17: 420–426. [PMC free article] [PubMed[Google Scholar]
30. El Wakeel AM, Elkassas DW, Yousry MM. Bonding of contemporary glass ionomer cements to different tooth substrates; microshear bond strength and scanning electron microscope study. Eur J Dent. 2015; 9: 176–182. [PMC free article] [PubMed[Google Scholar]
31. Yap AU, Tan AC, Goh AT, Goh DC, Chin KC. Effect of surface treatment and cement maturation on the bond strength of resin-modified glass ionomers to dentin. Oper Dent. 2003; 28: 728–733. [PubMed[Google Scholar]
32. Elsaka SE, Hamouda IM, Swain MV. Titanium dioxide nanoparticles addition to a conventional glass-ionomer restorative: influence on physical and antibacterial properties. J Dent. 2011; 39: 589–598. [PubMed[Google Scholar]
33. El-Askary FS, Nassif MS. The effect of the pre-conditioning step on the shear bond strength of nano-filled resin-modified glass-ionomer to dentin. Eur J Dent. 2011; 5: 150–156. [PMC free article] [PubMed[Google Scholar]
34. Rai N, Naik R, Gupta R, Shetty S, Singh A. Evaluating the Effect of Different Conditioning Agents on the Shear Bond Strength of Resin-Modified Glass Ionomers. Contemp Clin Dent. 2017; 8: 604–612. [PMC free article] [PubMed[Google Scholar]
35. Banomyong D, Palamara JE, Burrow MF, Messer HH. Effect of dentin conditioning on dentin permeability and micro-shear bond strength. Eur J Oral Sci. 2007; 115: 502–509. [PubMed[Google Scholar]